Excess sediment in your well water can cause discoloration, not to mention clogging and damaging your home’s plumbing system.
If you’re looking for a sediment filter, you’ll find that there are tons on the market. While variety is a good thing, it can be overwhelming going through all the choices, and you don’t want to make a decision that isn’t perfect for you.
That’s why we’ve done all the heavy lifting for you and prepared a list of the 5 best sediment filters for well water.
The Top 5 Choices for Sediment Well Water Filters
If you rely on well water for your day-to-day needs, sediment can be an annoying problem. Unlike water that comes from the city, well water isn’t treated before it reaches your home, so you have to be extra careful about your filtering process.
The following is a list of the 5 best sediment filters out there, so let’s go through them and see how they stack up.
This Welspo sediment filter is one of the best filters for well water you’ll find on the market today. It comes with a 40-micron stainless steel filter that eliminates sand, sediment, rust, and other water contaminants from your well water.
The filter is made of safe, food-grade material with a high-quality brass valve head that’s very durable. The filter housing is transparent, which allows for easy monitoring.
This filter is flushable, so it can be cleaned and reused before having to be replaced. It’s also a perfect pre-filter to use as part of a large multi-stage purification system, and it’ll protect the rest of the system from sediment build-up.
To ensure that you have sufficient water in your home at any time, this filter allows a flow rate of up to 20 gallons per minute, and the installation won’t cause any significant pressure drop.
- Has a flow rate of up to 20 gallons per minute
- Easy to install on your own
- Removes sediment, rust, sand, and any other large contaminants
- It’s flushable and re-usable
- Made of 100% food-grade material
- 40 microns is not very effective for smaller particles
- Will need to be used with other filters to remove bacteria and chemicals
The Culligan WH-S200-C model comes with a detailed installation manual and online installation videos that make it very easy to install by yourself.
The filter also comes with everything you need for the installation, including a housing wrench and brackets.
Like the last filter, the housing is transparent, which allows for easy visual monitoring when it comes to replacement time. There’s also a relief button on the filter, which allows you to release trapped air after installation.
When it’s ready for a change, the filter comes with a bypass valve and a removable filter timer, which will tell you exactly when it’s time for a replacement cartridge.
- Features clear housing for easy monitoring
- Easy to install with manuals and videos
- Includes a housing wrench and brackets
- Comes with a bypass valve and removable filter timer
- An Amazon’s Choice product
- Uses plastic threads, which people may not have experience with
- Bypass valve can be hard to turn
The filter is flushable when clogged for easy cleaning, and it can last for up to 6 months without replacement.
The iSpring filter provides a water flow rate of 20 gallons per minute, more than enough for the whole household.
To protect against scaly build-ups and corrosion, this filter uses Siliphos. Siliphos is a water treatment compound that adds to the filter’s lifetime by forming a thin protective layer on its components.
For easy monitoring, it’s housed in a transparent housing chamber. The filter is easy to install as well, and it comes with a step-by-step installation guide.
This filter makes a great pre-filter for a more comprehensive filtration system.
- Flushable filter to stay in optimal condition for longer
- Siliphos prevents scaly build-ups
- Features transparent housing for easy monitoring
- Can last for up to 6 months before it needs replacement
- Has a flow rate of 20 gallons per minute
- Some users require professional installation
- 50 microns is not very effective for smaller particles
This T-style filter by ProPlumber is another ideal sediment filter for your whole-house water needs. It filters out sediment, rust, and any other larger solid contaminants, protecting your home’s appliances and plumbing from build-up and clogging.
The ProPlumber filter features a 100 mesh polyester element, which provides superior filtration.
The filter also comes with a 1-inch PVC connection that ensures you continue to get a sufficient flow rate for your home water needs. The filter can handle a water flow rate of 25 gallons per minute and a maximum water pressure of 150 PSI.
Like the others, this filter also comes with clear housing for easy visual monitoring of the filter’s performance.
With the integrated in-line valve, you can easily remove collected sediment without making a huge mess.
- Suitable for both indoor and outdoor installation
- Can handle a water flow rate of up to 25 gallons per minute
- Easy to install
- Clear housing for visual monitoring
- Has a polyester filter mesh for superior filtration
- Some customers say it’s hard to find replacement parts
- Only filters out the largest sediment sizes, so may need to be used with other filters
The filter has 1-inch in-port and out-ports connectors that ensure that you get a sufficient water flow rate. It’s made of safe food-grade materials.
For when you need to change the filter, the filter comes with a bypass valve, which allows you to change the filter without making a huge mess.
The materials used to make this filter are tested by the WQA, to ensure they meet the laid down guidelines for safety.
The sediment reduces the amount of sediment, silt, chlorine taste and odor, and rust, among other things.
When you buy this filter, you also get a housing wrench, which comes in handy when you are installing and changing the filter, mounting brackets, as well as a life monitor for the filter so that you know precisely when to change it.
- It comes with a housing wrench and a life monitor for the filter
- The filter has 1-inch connectors on each side
- It comes with a bypass valve
- Made using safe, durable materials
- The plastic housing can be a bit delicate
Buyer’s Guide for Sediment Well Water Filters
Sediment contaminants https://www.epa.gov/superfund/superfund-contaminated-sediments are some of the most contaminants in water from any source. To effectively eliminate the sediment problem, you have to get the right filter for the job.
While there are lots of sediment filters on the market, not all of them will be suited to filtering your water supply. If you are looking for the most suitable one, here is what you should consider.
Think about micron size
A micron is one-millionth of a meter, a unit that’s used to measure particle sizes when it comes to filters. All filters will have a micron rating. This indicates the size of particles they can filter out.
You should pick a micron rating that can effectively capture the kind of contaminants in your water. The smaller the particles, the smaller the filter micron rating you get should be. A low micron rating filter will be able to capture small particles.
To know the micron size of the particles in your water, you should have your water tested to know the kind of contaminants in your water.
Think about how long you can use the filter without replacing it. Most sediment filters will indicate how long you should use them before you need to replace them. Some filters can last up to two years, but it depends on the amount of sediment in your water.
If there are a lot of sediment contaminants in the water, the filter might get clogged before the indicated lifetime elapses. In this case, you might have to replace it earlier.
Flushable sediment filters tend to last longer too. If you buy a flushable sediment filter, remember to flush it often to keep it in optimal condition.
The water’s flow rate.
A filter’s indicated flow rate will determine how much water you will have available in the house for use. Sediment filters will have an indicated flow rate anywhere from 15-40 gallons per minute.
If you are a large household, you might want to buy a filter that will not lower the flow rate a lot.
This is another important factor to consider when buying a sediment filter. Your water source will determine the kind and the number of contaminants in your water.
If you are using the city water, you are likely to have fewer contaminants in your water because it’s already purified to some level by the time it’s getting to your house. If you are using well water, on the other hand, you are most likely to have more contaminants in the water as its not been purified.
The best way to be certain is by having your water tested. This will tell you what contaminants you have in your water, and you can get an appropriate filter.
When shopping for a sediment filter, you should try and find an effective one within your budget. You, should not, however, compromise on the quality of the filter for a cheap price. If you get a cheap filter that does not work, it will cost you more in replacement cost.
Frequently Asked Questions About Sediment Water Filters
What kind of sediment filter should I get for my home?
As we have already seen, the kind of sediment filter depends on several factors. The most important factor to keep in mind, however, is your home’s water source. This will determine the kind of contaminants in your water.
If you get water from the municipal, the most common contaminants you need to worry about are chlorine, general chemical contaminants, and sediment contaminants. If you get your water from a well, on the other hand, you might have iron, hard metals, sediment, and hardness minerals.
The contaminants in well water may be more than in city water because well water has not had any prior treatment, unlike municipal water that gets treated before getting to your house. the best way to know the kind and quantity of contaminants in your water is by having your water tested.
What flow rate is ideal?
The water flow rate of the filter you buy will determine how much water you will have available for your home’s water needs. If you get a filter labeled 50GPM, it means the maximum amount of water you can have available in the house in one minute is up to 15 gallons every minute.
Most filters range from 25-40GPM, the higher the more the quantity needed to run your house, the higher the flow rate should be.
If you get your home’s water from a private well, a sediment filter is a necessity in your water supply system. In this guide, I have put together a list of the five best ones on the market currently. I hope you find your next filter in the list.
Culligan WH-HD200-C whole house heavy-duty water filter is a good place to start your search. It’s made using safe food-grade materials, has 1-inch connectors on each side, has a bypass valve, a clear housing for easy monitoring, and comes with a housing wrench to use during the installation and when you have to change the filter.